Lakeside residence · Lighting concept

Licensed electrical contractor Toronto & GTA

Better lighting.
Less wasted power.

LED lighting and smart controls to help lower lighting costs. Panel upgrades, wiring and repairs for homes and businesses across Toronto & the GTA.

Call usWhatsApp
ECRA/ESA #7018706Available 24/7
Discover the details

Outdoor lighting that works for you

Light the way.
Skip the wasted hours.

Steps, decks and garden lighting with efficient LEDs and controls suited to your property. Enjoy the light when you need it, then let a timer or sensor switch it off.

See how lighting can save energy

What we do

Electrical work.
For your home & business.

Building, renovating or fixing a problem? Choose a service below to see how we can help.

Choose your light colour.2700 K

Power & upgrades

Panel upgrades & new connections.

Add an EV charger, finish a basement or make room for new equipment. We review your existing capacity and explain the panel, circuit or service work your project needs.

Service connections / Panels / EV charging

Electrical service & capacity upgrades

Plan the supply around the way your property is used today and what you want to add. We review the existing service, anticipated loads and the scope of the connection or upgrade.

  • New service connections and supply upgrades
  • Capacity for renovations and new electrical loads
Panels, subpanels & distribution

Replace an outdated panel or bring power closer to where it is needed. Panel and subpanel work is considered together with circuit layout, access and the equipment being connected.

  • Panel replacement and distribution upgrades
  • Subpanels for additions, garages and outbuildings
Dedicated circuits & equipment connections

Give appliances and equipment the electrical connections they require. A considered installation includes the circuit, outlet or disconnect and the route back to the distribution panel.

  • Appliance, HVAC and workshop circuits
  • Equipment connections, outlets and disconnects
EV charging & load planning

Prepare a practical charging setup for your vehicle and property. Charger location, cable routing, available capacity and compatible load management are reviewed together.

  • Home and workplace charger installation
  • Electrical preparation and charging capacity review
Discuss project
Builds & wiring

Wiring for new builds & renovations.

Get outlets, switches and circuits where you need them. We handle rough-in, rewiring and electrical finishing for custom homes, basements, additions and renovations.

New builds / Rough-in / Rewiring

New construction & rough-in wiring

Lay out the electrical foundations before drywall and finishes. Power, lighting points, switch locations and cable routes are planned around the drawings and intended use of the space.

  • Custom homes and new-building electrical rough-in
  • Circuit routing, boxes and electrical distribution
Whole-home & partial rewiring

Renew existing wiring as part of a larger renovation or a focused upgrade. The scope is reviewed around the condition of the installation, room layouts and access through the property.

  • Whole-home and room-by-room rewiring
  • Replacing outdated wiring and revising circuit layouts
Renovations, additions & basement wiring

Adapt the electrical installation to a changing floor plan. Kitchens, bathrooms, finished basements and additions each need a coordinated plan for power, fixtures and controls.

  • Kitchen, bathroom and basement electrical work
  • Additions, garages and reconfigured spaces
Finishing, devices & fixture installation

Bring the rough-in through to the details you see and use every day. Fixtures, switches, receptacles and controls are installed as part of a considered finished space.

  • Switches, receptacles and dimmers
  • Fixture installation and electrical finishing
Discuss project
Smart homes

Stop leaving lights on.

Use dimmers, sensors and schedules to cut unnecessary lighting use. Control compatible lights from switches, keypads or your phone, with settings that fit your daily routine.

Scenes / Keypads / Connected living

Smart lighting & scene control

Set the light level you need with compatible LED dimmers, switches and keypads. Save room settings for everyday use and avoid running every light at full output.

  • Smart switches, dimmers and keypads
  • Room and whole-home lighting scenes
Sensors, schedules & everyday automation

Stop paying to light empty spaces. Motion and occupancy sensors, timers and schedules can switch lights off when they are not needed. We match the control to the room and how you use it.

  • Occupancy and motion-based lighting
  • Timers, schedules and compatible control routines
Connected-home wiring & device installation

Prepare the wiring and power behind connected living. We discuss the intended devices and integration requirements before deciding how the installation should be arranged.

  • Power and pre-wiring for smart-home devices
  • Installation of compatible connected controls
Control setup & system updates

Bring the physical installation and its controls into the same plan. Device compatibility, grouping and everyday operation are considered as part of a new setup or an update to an existing installation.

  • Configuration of compatible lighting controls
  • Upgrades to existing switches and control layouts
Discuss project
LED & lighting

LED lighting, inside & out.

Replace inefficient lighting or add a new look with energy-efficient LEDs. We plan the fixtures, profiles and controls for kitchens, rooms, entrances, decks and gardens.

Interiors / Facades / Landscape

Interior & recessed LED lighting

Upgrade older, less efficient lighting to LEDs selected for the brightness and colour you want. We consider light output, wattage and compatible dimming together, so the room works well without unnecessary lighting load.

  • Recessed lights, pendants and feature fixtures
  • Room, task and accent lighting installations
Integrated LED strips & profiles

Add clean lines of light under cabinets, in ceilings or along built-in furniture. We select LED strips, profiles, drivers and compatible controls together for the required output and a tidy, serviceable installation.

  • Millwork, coves, cabinets and ceiling profiles
  • Linear LEDs, drivers and compatible dimming
Exterior, deck & architectural lighting

Give entrances, facades and outdoor living areas a deliberate nighttime presence. Integrated lighting can define stairs, terraces, railings and key architectural details.

  • Facade, soffit, entrance and perimeter lighting
  • Steps, decks and illuminated glass-rail profiles
Landscape & in-ground lighting

Reveal the approach to a property and the planting around it. Recessed ground fixtures, bollards and carefully aimed accents create a layered exterior composition.

  • In-ground and paving lights
  • Path lights, bollards and tree or garden uplights
Discuss project
For business

Power & lighting for your business.

Electrical work for offices, shops, restaurants and other commercial spaces. We install equipment connections, upgrade lighting and help reduce wasted lighting energy with suitable controls.

Fit-outs / Equipment / LED retrofits

Commercial fit-outs & renovations

Prepare a new space or adapt an existing one for the business moving in. Electrical layout, lighting and equipment connections are reviewed against the proposed use and fit-out plans.

  • Office, retail and hospitality electrical fit-outs
  • Tenant improvements and space reconfiguration
Business power & equipment connections

Arrange distribution and connections around the equipment a business uses. Circuit requirements, disconnects and the available supply form part of the project review.

  • Dedicated circuits and equipment power
  • Panel, subpanel and distribution changes
Commercial lighting & LED upgrades

Reduce lighting energy use with efficient LED fixtures and suitable controls. We review the existing lighting, operating hours and space layout to identify useful replacements, dimming and automatic shut-off options.

  • Office, retail and commercial LED lighting
  • Fixture replacement, retrofits and lighting controls
Electrical service for managed properties

Support the ongoing electrical needs of a business or property. Tell us about the issue, access arrangements and operating hours so the work can be scoped around the site.

  • Electrical repairs and replacement work
  • Planned service for commercial and rental properties
Discuss project
Service & repairs

Find the fault. Fix the problem.

Tripping breakers, failed lights or outlets that no longer work? Tell us what is happening. We troubleshoot the cause, explain the work needed and handle the repair.

Diagnostics / Repairs / Outdoor power

Fault finding & troubleshooting

Trace an electrical problem to its source rather than guessing at a replacement. Describe what happens, which areas are affected and when the issue started.

  • Circuit, outlet and lighting fault diagnosis
  • Investigation of repeated electrical interruptions
Electrical repairs & replacements

Restore or update the parts of an installation that need attention. We review the issue and the condition of the surrounding circuit before agreeing on the work.

  • Switches, outlets, fixtures and circuit repairs
  • Replacement of damaged or outdated electrical devices
Protection & practical upgrades

Review improvements around the equipment and circuits already in place. Protective devices and surge protection are selected to suit the installation and the intended use.

  • Surge protection installations
  • Updates to circuit protection and electrical devices
Outdoor power & special connections

Bring suitable power to the parts of the property beyond the main rooms. Location, exposure, cable routes and equipment requirements are considered before installation.

  • Outdoor receptacles and garden or garage power
  • Electrical connections for outdoor equipment
Discuss project

Work directly with the owner

Talk to Denys.
Know who’s doing the work.

Denys Kamenskyi leads Toronto Oblenergo and is a Licensed 309A Electrician. Talk directly with Denys about the problem, the options and the work your property needs. From a repair to a full installation, start with a clear plan.

Denys KamenskyiOwner · Toronto Oblenergo

Licensed 309A Electrician

ECRA/ESA licence #7018706

Contact Toronto Oblenergo

Spend less on lighting

Save energy.
Keep the lighting you love.

Good lighting starts with the right products and a practical plan. We select efficient LEDs and compatible controls to help reduce the electricity your lighting uses.

LED upgrades

More useful light.
Less power.

Replace older, less efficient lights with LEDs chosen for the brightness you need. We compare light output and wattage, not just the look of the fixture.

Automatic controls

Stop lighting
empty spaces.

Sensors, timers and schedules help switch lights off when they are not needed. Useful for entrances, outdoor areas and rooms that are easy to forget.

Product selection

The right parts.
Working together.

LED fixtures, drivers and dimmers need to be compatible. We select them together for the light level, control and installation your project needs.

Savings depend on your current lighting, selected products and hours of use.

Ask about an LED upgrade

Repairs, upgrades & new installations

Tell us what you need.
Let’s plan the work.

Call us or send photos on WhatsApp.
We’ll discuss the options and the next step.

Call or message us

+1 647 297 1121

Call us WhatsApp
Email us

Based in Toronto. Serving the GTA.
For other locations, get in touch to discuss your project.